We providing Electrical AMC Services for multinational companies, corporate offices, Industrial, Commercial with all Proper Service reports & Solutions.
The Electrical AMC Services offered by us include all kinds of electrical work, testing, finding the any abnormal condition etc..

Comprehensive AMC Services:
Analysis of breakdowns or faults in system and repairing/service of the same
Includes spare parts replacements.
Preventive maintenance on agreed schedule/frequency.

Non-Comprehensive AMC Services
Analysis of breakdowns or faults in the system and reporting the cause/reason for the same
Cost of the spare parts replacements to be borne by the clients
Includes consultancies, suggestions to solve the Problems in the System.

Power factor is a measure of how effectively you are using electricity. Various types of power are at work to provide us with electrical energy.

Working Power – the “true” or “real” power used in all electrical appliances to perform the work of heating, lighting, motion, etc. We express this as kW or kilowatts. Common types of resistive loads are electric heating and lighting.

An inductive load, like a motor, compressor or ballast, also requires Reactive Power to generate and sustain a magnetic field in order to operate. We call this non-working power kVAR’s, or kilovolt-amperes-reactive.

Every home and business has both resistive and inductive loads. The ratio between these two types of loads becomes important as you add more inductive equipment. Working power and reactive power make up Apparent Power, which is called kVA, kilovolt-amperes. We determine apparent power using the formula, kVA2 = kV*A.

Low power factor overloads generating, distribution, and networks with excess KVA.

There are several methods of correcting lower power factor. Commonly used are: - Capacitors.

Capacitor Banks

The most practical and economical power factor correction device is the capacitor. It improves the power factor because the effects of capacitance are exactly opposite from those of inductance. Capacitors can be installed at any point in the electrical system and will improve the power factor between the point of application and the power source.

All the people living or working in residential, commercial and industrial installations, particularly the operators and personnel who are in close operation and contact with electrical systems and machineries, should essentially be protected against possible electrification. To achieve this protection, earthing system of an installation is defined, designed and installed according to the standard requirements..

Purpose of Earthing:-

• To save human life from danger of electrical shock or death by blowing a fuse.
• To protect buildings, machinery & appliances under fault conditions.
• To ensure that all exposed conductive parts do not reach a dangerous potential.
• To provide safe path to dissipate lightning and short circuit currents.
• To provide stable platform for operation of sensitive electronic equipments.
• To provide stable platform for operation of sensitive electronic equipments.

We Provide the maintenance free Earthing System. We do the New Earth pits & Maintain the old Earth pits through Earthcon Solution
We provide the Pipe, Plate & Rod Earthing systems.

• Co-ordination between client & various agencies.
• Obtaining clearances / approvals from various Government / Statutory Authorities.
• Liasioning with Electrical Inspector of Electricity Board etc.
• Arrange meetings / site visits / inspection of various government authorities for clearances & approvals